Paxar 9830-CL Operator's Handbook Manual page 39

8. Align the new printhead with the tabs.
9. Snap the printhead into place.
Do not
touch here
10. Clean the new printhead with a cotton swab dipped in
isopropyl alcohol to remove any salt or oil left from handling.
11. Let the printhead dry and reload your supplies.
12. Close the printhead assembly and the cover.
13. Turn on the printer.
14. Press Feed to position the supply under the printhead.
4-8 Care and Maintenance
Make sure the printhead cable does not
touch the ribbon roll.