Replacing The Printhead - Paxar 9830-CL Operator's Handbook Manual

R e p l a c i n g t h e P r i n t h e a d
You may have to replace the printhead if it is damaged or
worn-out. For example, you may see 616 (bad dot or dots) or 765
(printhead failure) error codes.
damage the printhead or reduce its life. Ground yourself
by touching some metal, such as the printer's metal base,
remove any salt or oil left from handling prior to operation.
To replace the printhead:
1. Turn off the printer.
2. Open the cover.
3. Unlock the printhead by turning the retaining latch.
4-6 Care and Maintenance
The printhead is sensitive to static electricity, which can
before touching the printhead. Clean the printhead to
CAUTION