Printer Assembly; Fuse Configuration - Paxar 545 User Manual

Printer Assembly

Fuse Configuration

Users Manual Model 545™
The main fuse(s) on the Paxar 545 are located inside the AC entry. The entry has a
fuse drawer that holds the fuse(s) and selects the appropriate line voltage. If the
voltage in the window DOES NOT match the AC line amplitude intended to be
supplied to the printer, DO NOT plug the power cord in. Reconfigure as follows:
1) Using a flat blade screwdriver, open the AC entry by lifting the tab just above
the voltage indicator window.
2) Remove the red fuse drawer.
3) Remove all fuses and the fuse jumper if it is present.
4) Insert into the fuse drawer the correct number and style of fuse(s) and fuse jumper
for your application.
Configuration Number One:
(See 115VAC Fuse Placement)
1) Install one 990689 – 6.25A 250V Fast Acting 1/4 x 1 1/4"
2) Install one Fuse Jumper
AC Entry
Line voltage within the range of
90 - 132VAC @ 50 - 60Hz
Printer Assembly • 13