Rep 1.0.9 Control Panel - Xerox Phaser 8560MFP Service Documentation

Figure 2 Removing the Scanner Hinges
Initial Issue
Phaser 8510/8560MFP Multifunction Product

REP 1.0.9 Control Panel

Parts List on PL 1.0
Removal
1. Open the Scanner Assembly.
2. Remove 2 (plastic, T-20) screws that secure the Control Panel to the Scanner Assembly.
Figure 1 Removing the Control Panel
3. Release the tab at each end of the Control Panel, then release the remaining 4 tabs along
the front edge to access the Control Panel connector.
4. Disconnect P/J19 and remove the Control Panel from the Scanner Assembly.
10/2006
4-7
Repairs and Adjustments
REP 1.0.8, REP 1.0.9