Rep 8.1 Control Panel (B205) - Xerox B205 Service Manual

REP 8.1 Control Panel (B205)

Parts List on PL 8.1
Removal
1. Switch off the printer, then disconnect the power cord.
2. Remove the Right Side Cover, REP
3. Remove the Automatic Document Feeder (ADF),
4. Remove the Scanner Module, REP
5. Remove four screws under the Control Panel,
Figure 1 Control Panel screw removal
Initial Release
Xerox® B205/B215 Multifunction Printer Service Manual
2.2.
REP 1.5.
7.2.
Figure 1.
Screws
6. Release the Control Panel Assembly by lifting up the front of the panel while pulling it for-
ward, Figure 2.
Figure 2 Control Panel release
7. Disconnect three Control Panel PWB connectors, then remove the Control Panel,
3.
Figure 3 Control Panel removal
Replacement
The replacement is the reverse of the removal procedure.
July 2019
4-63
Connectors
Repairs / Adjustments
REP 8.1
Figure