Disassembly Overview NOTE: Names of parts that appear in the removal and replacement procedures may not match the names that appear in the Parts List. For example, a part called the Registration Chute This section contains the removal procedures for field-replaceable parts of the system listed in Assembly in a removal procedure may appear on the Parts List as Assembly, Chute REGI.
Page 5
REP 1.0.1 Front Door / Tray 1 Assembly Reco Table 1 list s basic , recom mended, and opt ional t ools used to ser vice t his and ot her similar Parts List on PL 1.0 products. Removal Open the Front Door and release the 2 Stopper Straps. Table 1 Recommended Service Tools Description Detail...
erview Serial Number Format The Parts List section identifies all part numbers and the corresponding location of all spared Changes to Xer ox product s are m ade t o ac commodate i mproved com ponents. A s subsystem components. improvements are made, par t numbers may change from those appearing in t his section.
Page 7
6 Diagnostics System Power On Process ..................... Hidden Service Menu...................... Service Diagnostics......................Print Engine Check Menu Tests..................6-13 General Troubleshooting....................6-34 Electrical Troubleshooting....................6-36 DADF Malfunction ......................6-39 Scanner Malfunction ....................... 6-40 Control Panel Malfunction ....................6-40 Exit Module Malfunction ....................6-41 Media Path and Transport Problems ................