Scalping - Ransomes HR3300T Safety, Operation & Maintenance Manual

12 QUALITY OF CUT
12.3

SCALPING

NOTE: Arrow indicates direction of travel.
Probable Cause
HOC (height-of-cut) settings are lower than normal.
Turf too uneven for the mower to follow.
Cutting too much grass at one time.
Mowing (ground) speed is too fast.
en-74
Scalping is a condition in which areas of grass are
cut noticeably shorter than the surrounding areas,
resulting in a light green or even brown patch. This
is usually caused by an excessively low height-of-cut
(HOC) setting and/or uneven turf.
TN0222
Check/adjust the HOC settings.
Change mowing direction.
Mow more often.
Reduce mowing (ground) speed.
Remedy