Maintenance & Lubrication Chart - Ransomes HR3300T Safety, Operation & Maintenance Manual

8 MAINTENANCE &
LUBRICATION
8.1 MAINTENANCE & LUBRICATION CHART
Interval
First 50 hours
Daily
10 hours
Weekly
Every 50 hours
Every 250
hours
End of season
Every 1000
hours
Lubricate all Grease fittings with Shell Darina R2 or equivalent Grease weekly
A = Lift Arm Pivot LH, B = Lift Arm Pivot RH, C = Stub Axle Pivot LH, D = Stub Axle Pivot RH, E =
Axle Pivot Centre, F = Steering Ram Ball Joint LH, G = Steering Ram Ball Joint RH (see diagram)
Refer to Engine Manufacturers Manual for Additional Engine Maintenance Procedures
A Engine Oil (with filter)
B Hydraulic Oil (with filter)
C Radiator Coolant
D Fuel
en-44
SAFETY, OPERATORS & MAINTENANCE MANUAL
MAINTENANCE AND LUBRICATION CHART
Item
Change Engine Oil
Check Fan Belt Tension
Check Engine Oil Level.
Check Safety Interlock System.
Check Engine Coolant Level
Check Hydraulic Fluid Level
Check Tyre Pressure
Check Rear Wheel Hub Nut Lock
Check Engine Bay for Debris
Check for Loose Components.
Check for Hydraulic Leaks.
Check Fan Belt Tension.
Check Air Filter Tell Tail Indicator*.
Change Engine Oil & Oil Filter.
Check Battery Condition.
Change Engine Oil & Oil Filter.
Change Engine Air Filter Element*
Replace Fuel Filters
Change Hydraulic Oil & Filters
Drain & Clean Fuel Tank
Drain & Replace Engine Coolant
* Check more often in dirty conditions
FLUID REQUIREMENTS
Quantity
5.1 Litres
IMPORTANT
42 litres Shell Tellus 46 (ISO VG 46)
Greenscare 46 (ISO 46) Bio Degradable Oil
5 litres
51 litres No 2-D (ASTM D975) Diesel
Section
8.2
8.3
8.2
7.2
8.4
8.5
4.2
8.11
8.12
8.12
8.12
8.3
8.9
8.2
8.9
8.2
8.9
8.8
8.5
8.8
8.4
Type
10W 30
50% Anti-Freeze