Streaks - Ransomes HR3300T Safety, Operation & Maintenance Manual

Table of Contents

Advertisement

Available languages

Available languages

12 QUALITY OF CUT
12.5

STREAKS

NOTE: Arrow indicates direction of travel.
Probable Cause
Damaged blade(s).
Turning too aggressively. Cutting units don't overlap
during turns or on side hills.
Tire mats down grass before it is cut.
Wet grass is matted down before it is cut.
Tire mats down grass before it is cut.
Wet grass is matted down before it is cut.
en-76
A streak is a line of uncut grass. This is usually caused
by a damaged blade.
TN0224
Replace blade(s).
Turn less aggressively to allow cutting units to over-
lap. Change mowing direction or pattern on side
hills.
Check/adjust tire inflation pressure. (
)
nance Section.
Cut when grass is dry.
Check/adjust tire inflation pressure.
Mow when grass is dry.
Remedy
Refer to Mainte-

Advertisement

Chapters

Table of Contents
loading

Table of Contents