Sharp AR-C150 Service Manual page 37

No.
Name
23 Paper pickup roller (No. 1 paper tray)
24 Idle roller
25 Paper transport roller 2
26 Paper feed roller (No. 2 paper roller)
27 Separation roller (No. 2 paper tray)
28 Paper pickup roller (No. 2 paper tray)
29 Idle roller
30 Paper transport roller 3
31 Paper feed roller (No. 3 paper tray)
32 Separation roller (No. 3 paper tray)
33 Paper pickup roller (No. 3 paper tray)
34 Idle roller
35 Paper transport roller 4
36 Paper feed roller (No. 4 paper tray)
37 Separation roller (No. 4 paper tray)
38 Paper pickup roller (No. 4 paper tray)
39 Transfer roller (K)
40 OPC drum unit (K)
41 Main charger unit (K)
42 OPC drum unit (C)
43 Transfer roller (C)
44 Main charger unit (C)
45 OPC drum unit (M)
46 Transfer roller (M)
47 Main charger unit (M)
48 OPC drum unit (Y)
49 Transfer roller (Y)
50 Main charger unit (Y)
51 Transfer belt
52 Waste toner bottle
53 Oil tank
54 Lower heater lamp
55 Lower heat roller
56 Lower separation pawl
57 Fusing transport roller
58 ADU gate
59 Paper exit roller
60 Idle roller
61 Idle roller
62 Upper cleaning roller
63 Upper heat roller
64 Upper heat lamp
65 Oil roller
66 Oil blade
67 Separation pawl
68 Waste toner bottle
69 Paper pickup roller
70 Paper pickup solenoid
71 Manual paper feed roller
72 Manual paper feed clutch
73 Separation roller
74 Manual transport roller
75 Idle roller
76 Resist roller cleaner
Parts
Function and operation
Sends paper to the paper feed roller.
Applies pressure to paper and the transport roller.
Transports paper to the transport roller 1.
Feeds paper to the paper transport section.
Separates paper and prevents against double feed.
Sends paper to the paper feed roller.
Applies pressure to paper and the transport roller.
Transports paper to the transport roller 2.
Feeds paper to the paper transport section.
Separates paper and prevents against double feed.
Feeds paper to the paper feed roller.
Applies pressure to paper and the transport roller.
Transports paper to the transport roller 3.
Feeds paper to the paper transport section.
Separates paper and prevents against double feed.
Sends paper to the paper feed roller.
Applies a transfer voltage to the transfer belt.
Forms black latent electrostatic images.
Charges the black OPC drum negatively.
Forms cyan latent electrostatic images.
Applies a transfer voltage to the transfer belt.
Charges the cyan OPC drum negatively.
Forms magenta latent electrostatic images.
Applies a transfer voltage to the transfer belt.
Charges the magenta OPC drum negatively.
Forms yellow latent electrostatic images.
Applies a transfer voltage to the transfer belt.
Charges the yellow OPC drum negatively.
Transfers toner images on the OPC drum to paper.
Collects waste toner.
Stores oil.
Heats the lower heat roller.
Applies a pressure and heat to toner and fuses it to paper.
Separates paper mechanically from the lower heat roller.
Transports paper to the paper exit roller.
Switches the paper route in the duplex mode.
Discharges paper outside the machine.
Applies pressure to paper and the paper exit roller.
Applies pressure to paper and the transport roller.
Cleans the fusing roller.
Applies a pressure and heat to toner and fuses it to paper.
Heats the upper heat roller.
Applies oil to the upper heat roller.
Controls oil quantity on the oil roller to be even.
Separates paper from the transfer belt mechanically.
Collects waste toner from transfer belt.
Sends paper to the paper feed roller.
Presses paper onto the paper pickup roller.
Feeds paper to the paper transport section.
Transmits the paper feed drive motor power to the manual paper feed unit.
(Controls ON/OFF of the manual paper feed unit.)
Separates paper to prevent against double feed.
Applies a pressure to paper and the transport roller to give the transport roller
power to the paper.
Applies a pressure to paper and the transport roller and gives a transport power of
the transport roller to the paper.
Clean the resist roller.
5 – 5A
Note
Japan only
Manual paper
feed section
AR-C160/C270