Sharp AR-C150 Service Manual page 107

Code
Function (Purpose)
Main Sub
43 1 Used to set the fusing temperature in each
operation mode.
7 Used to adjust the fusing oil supply amount.
(Adjustment of oil motor ON time and oil
motor ON interval)
44 1 Used to set enable/disable of correction
operations in the image forming (process)
section.
2 Used to check the operation of the
temperature sensor and the humidity sensor
for correction of the image process section.
(The sensor detection level can be
monitored.)
4 Used to set the target image (reference)
density level in correction (process
correction) operations in the image forming
section.
5 Used to set the correction start developing
bias voltage in correction (process
correction) operations in the image forming
section.
6 Used to forcibly execute the image forming
section correction (process correction).
9 Used to check the data on the image forming
section correction (process correction)
(corrected main charger grid voltage, the
developing bias voltage, the laser power, etc,
in each print mode). (This simulation allows
to check if the correction operation is
performed normally.)
12 Used to check the toner image patch density
data in the image forming section correction
(process correction). This simulation allows
to check if the correction operation is
performed normally.)
13 Used to adjust the image density sensor (for
color) sensitivity (gain).
14 Used to monitor the output level of the fusing
temperature sensor, the machine
temperature sensor, and the humidity sensor.
16 Used to check the toner concentration
correction result. (This simulation allows to
check if correction is executed properly or
not.)
20 Used to adjust the phase of OPC drum
deflection. (Used to adjust deflection phases
of four OPC drums.) (Old)
21 Used to store color balance adjustment data.
(Half tone image correction initial setting)
(After execution of color balance adjustment
with SIM 46-21, this simulation must be
executed.)
22 Used to check each color toner patch image
density UITU in half tone image forming
section correction (process correction). (This
simulation allows to check if correction
operation is performed normally.)
23 Used to adjust the image density sensor
position (main scan direction). (The position
is adjusted when toner patch is formed.)
24 Used to check the half tone correction result.
(This simulation allows to check if correction
is executed properly or not.)
25 Used to check the half tone correction result.
(This simulation allows to check if correction
is executed properly or not.)
Purpose
Setting Fixing (Fusing)
Adjustment Fixing (Fusing)
Setting Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
Operation test/check
Setting Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
Setting Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
Operation test/check Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
Operation data Image process
output/Check (Photoconductor/
(Display/Print) Developing/Transfer/
Cleaning)
Operation data Image process
output/Check (Photoconductor/
(Display/Print) Developing/Transfer/
Cleaning)
Adjustment Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
Operation data Others
output/Check
(Display/Print)
Operation data Image process
output/Check (Photoconductor/
(Display/Print) Developing/Transfer/
Cleaning)
Adjustment Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
Setting
Operation data Image process
output/Check (Photoconductor/
(Display/Print) Developing/Transfer/
Cleaning)
Adjustment Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
Operation data Image process
output/Check (Photoconductor/
(Display/Print) Developing/Transfer/
Cleaning)
Operation data Image process
output/Check (Photoconductor/
(Display/Print) Developing/Transfer/
Cleaning)
8 – 7
Section
Operation
Operation
Operation
Operation
Picture quality
Developer/ Operation
Toner Hopper
Operation
Data
Data
Copy
Developer/ Data
Toner Hopper
Photo Operation
conductor
Picture quality
Data
Copy
Data
Data
Item
Density
Operation data
(Machine
condition)
Operation data
(Machine
condition)
Operation data
(Machine
condition)
Operation data
(Machine
condition)
Operation data
(Machine
condition)
Operation data
(Machine
condition)