Sharp AR-C150 Service Manual page 172

S07/Ua01/P10 Oil applying blade
1) Remove the screw, and remove the oil applying blade
(S07/Ua01/P10/REP).
5
∗
When assembling, tighten the screws in the sequence of
numbering.
S07/Ua01/P11 Oil applying roller
1) Remove the screw, and remove the oil applying unit.
2) Remove the oil applying roller.
S07/Ua01/P12 Upper heat roller gear F
1) Remove the upper heat roller unit. S07/Ua01/P13
∗
Apply grease to the inside of the collar.
GRE
(This is not installed to the AR-C160/C270.)
∗
For the AR-C160/C270, replace the whole unit of the upper heat
roller unit.
1
2
3
4
S07/Ua01/P12/REP
S07/Ua01/P13 Upper heat roller
1) Remove the heater lamps. S07/Ua01/P14
2) Remove the step screw and the connector, and release the pres-
sure. Remove the fixing screws of the upper/lower fusing units,
then remove the upper/lower fusing units upward/downward.
3) Remove the upper heat roller unit.
(AR-C250)
(AR-C150)
4) Remove the parts, and remove the upper heat roller (S07/Ua01/
P16/REP).
(This is not installed to the AR-C160/C270.)
∗
For the AR-C160/C270, replace the whole unit of the lower heat
roller unit.
11 – 28
S07/Ua01/P18
S07/Ua01/P13/GRE