Sharp AR-C150 Service Manual page 106

Code
Function (Purpose)
Main Sub
26 55 Used to set the fusing capability (image
process) in the heavy paper mode.
(AR-C150)
Used to select the gamma characteristics in
the color copy mode. (AR-C250/C160/C270)
27 1 Used to set the specifications for operations
in case of communication trouble between
the host computer and MODEM (machine
side). (When communication trouble occurs
between the host computer MODEM and
the machine, the self diag display (U7-00) is
printed and setting for inhibition of print or not
is made.)
2 Used to set or change the host
computer/MODEM number. (This setting is
required when a communication is made
between the copier and the computer
through MODEM.)
3 Used to set and change the ID numbers of
the copier, the host computer/MODEM. (This
setting is required when a communication is
made between the copier and the computer
through MODEM.)
4 Used to enter the service start time and
service end time for management of
servicing. (The data can be checked with the
host computer.)
5 Used to enter the machine TAG No. (This
function allows to check the TAG No. of the
machine with the host computer.)
6 Used to set ON/OFF of service call sending
to the service center by use of RIC when
trouble occurred in the machine. (The
service call is not sent automatically, but sent
manually.)
29 4 Used to set the print count system in the
printer mode. (AR-C150/C250/C160/C270)
30 1 Used to check the operation of sensors and
detectors in the paper feed, paper transport,
paper exit sections and the related circuits.
2 Used to check the operation of sensors and
detectors in the paper feed section and the
related circuits. (The operation of the paper
feed sensors and detectors can be
monitored with the LCD display.)
33 1 Used to check the operation of the card
reader and the sensors and the related
circuits. (The card reader sensor operation
can be monitored with the LCD display.)
(AR-C150/C250/C160/C270)
40 1 Used to check the operation of the manual
feed tray paper size detector and the related
circuit. (The operation of the manual feed
tray paper size detector can be monitored
with the LCD display.)
(AR-C150/C250/C160/C270)
2 Used to adjust the manual feed tray paper
width detector detection level.
(AR-C150/C250/C160/C270)
4 Used to check the OHP sensor and its
control circuit. (AR-C150/C250/C160/C270)
5 Used to adjust the detection level of the OHP
sensor. (AR-C150/C250/C160/C270)
6 Used to set the OHP sensor adjustment
parameter. (AR-C150/C250/C160/C270)
41 1 Used to check the operation of the document
size sensor and the related circuit. (The
operation of the document size sensor can
be monitored with the LCD display.)
2 Used to adjust the document size sensor
detection level.
3 Used to check the operation of the document
size sensor and the related circuit. (The
document size sensor output level can be
monitored with the LCD display.)
Purpose
Setting ICU
Setting Communication unit
(TEL/LIU/MODEM etc.)
Setting Communication unit
(TEL/LIU/MODEM etc.)
Setting Communication unit
(TEL/LIU/MODEM etc.)
Setting Communication unit
(TEL/LIU/MODEM etc.)
Setting Communication unit
(TEL/LIU/MODEM etc.)
Setting Communication unit
(TEL/LIU/MODEM etc.)
Setting Memory
Operation test/check
Operation test/check Paper transport
Operation test/check Others
Operation test/check Paper transport
Adjustment Paper transport
Operation test/check Paper transport
Adjustment Paper feed
setting Paper feed
Operation test/check/ Others
Operation data
Output/Check
(Display/Print)
Adjustment Others
Operation test/check Others
8 – 6
Section
Operation
Specifications
Data
Data
Data
Data
Specifications
Counter
Operation
Operation
Operation
Operation
Operation
Operation
Operation
Operation
Operation
Operation
Operation
Item
Operation mode
(Common)
User data
Communication
Communication
User data
Others