Sharp AR-C150 Service Manual page 133

FSM (L): The smaller the set value is, the slower the speed is.
±1 for about 0.1% change
FSM (S): The smaller the set value is, the slower the speed is.
±1 for about 0.1% change
DM(BK): The smaller the set value is, the higher the speed is.
±1 for about 0.15% change
DM(CL): The smaller the set value is, the higher the speed is.
±1 for about 0.15% change
PFM: The smaller the set value is, the higher the speed is.
±1 for about 0.1% change
DVKM: The smaller the set value is, the higher the speed is.
±1 for about 0.1% change
DVCM: The smaller the set value is, the higher the speed is.
±1 for about 0.1% change
Item
AR-C100/C150
A. RRM 55
B. BELTM 51
C. FSM(L)
45
D. FSM(S)
40
E. DM(BK) 42
F. DM(CL) 37
G. PFM —
H. DVKM —
I. DVCM —
(AR-C160/C270)
51
51 - 2
Purpose Adjustment
Function Used to adjust the contact pressure of paper on the re-
(Purpose) sist roller of each section (each paper feed and duplex
feed of the copier). (This adjustment is required when
the print image position variations are considerably
great or when paper jams occur frequently.)
Section Paper transport (Discharge/Switchback/Transport)
Item Operation
Operation/ 1. Select the adjustment mode with [↑],[↓]keys.
Procedure
2. Enter the adjustment value with the 10-key.
Default
AR-C250 AR-C160/C270
55 55
51 51
(JAPAN:50 (JAPAN:55
EX JAPAN:40) EX JAPAN:50)
(JAPAN:45 (JAPAN:60
EX JAPAN:40) EX JAPAN:55)
42 42
37 37
— 50
— 50
— 50
3. Press the [OK] key. (The value entered in procedure 2 is set.)
Used to set the resist roller clutch (RRC) ON timing.
When the set value is increased, the timing is delayed and the
paper pressure onto the resist roller is increased. When the set
value is changed by 1, the timing is changed by about 1.0msec.
The set range is 0 – 99 for all.
MANUAL Resist quantity adjustment in manual paper feed
(Default: 40)
Resist quantity in the machine tray paper feed
Adjustment (Default: 60)
TRAY Resist quantity in high speed transport in the copier
and the desk paper feed.
LCC Resist quantity adjustment in high speed transport in
LCC paper feed. (Default: 70)
ADU Resist quantity adjustment in ADU paper feed.
(Default: 70)
64
64 - 3
Purpose Operation test/check
Function Used to check the operation (self print) of the printer
(Purpose) section. (The print pattern, the paper feed mode, the
print mode, the print quantity, and the density can be
set optionally.) (monochrome) (AR-C160/C270)
Section Printer
Item Operation
Operation/ 1. Select the item with [↑], [↓] keys.
Procedure
2. Enter the print conditions with the 10-key.
3. Press the [EXECUTE] Key.
The self print pattern is printed.
The print color can be specified: [K] black, [C] cyan, [M] magenta,
[Y] yellow.
8 – 33