Sharp AR-C150 Service Manual page 173

S07/Ua01/P14 Upper heater lamp
1) Remove the lamp holders and the connector.
2) Remove the upper heater lamp.
S07/Ua01/P15 Duplex gate solenoid (AR-C150/C250)
1) Open the paper exit/transport guide.
2) Remove the screw and the spring, and remove the duplex gate
solenoid.
S07/Ua01/P15
Installing position: Center
S01/Ua01/P15
S07/Ua01/P16 Heater lamp control PWB (AC sub PWB)
1) Remove the connector, and remove the heater lamp control PWB
(AC sub PWB) (S07/Ua01/P16).
S07/Ua01/P17 Lower separation pawl
1) Open the upper and the lower fusing units.
2) Open the lower separation pawl unit (paper guide).
(AR-C150)
(AR-C250/C160/C270)
3) Remove the spring, and remove the lower separation pawl
(S07/Ua01/P17/CHK/REP).
(AR-C150)
S07/Ua01/P17/CHK/REP
11 – 29