Sharp AR-C150 Service Manual page 113

Display
DF ----- Document feed unit not installed
AR-RF1 Document feed unit (RADF) installed
ADU ----- Duplex module not installed
AR-DU2 (N) Duplex module installed
CAS ----- Cassette not installed
AR-CS2 (N) Cassette installed
OUTPUT ----- After-treatment unit not installed
AR-SS2 20-bin staple sorter installed
AR-FN4 Finisher installed
LCC Large capacity paper feed tray not
-----
installed
Large capacity paper feed tray
AR-LC2 (N)
installed
PRINTER ----- Printer expansion kit not installed
Printer expansion kit (Japan)
AR-PE1/PE2
installed
26
26 - 1
Purpose Setting
Function Used to make option setup. (When installing an option,
(Purpose) this simulation is used to setup for that option (soft-
ware). (AR-C150/C250/C160/C270)
Item Specifications
Operation/ Enter the code number corresponding to the option in-
Procedure stallation with the 10-key pad and press the [OK] key.
When an option is installed or removed, this setting
must be changed accordingly. If this setting is improper,
an error message is displayed.
Item Set value
ADF type 0 No connection
1 AR-RF1
CST type 0 No connection
1 AR-DU2 (N)
2 AR-CS2 (N)
FIN type 0 No connection
1 AR-SS2
2 AR-FN4
PRN type 0 No connection
1 AR-PE1/PE2
Default: 0 (No connection) NONE
Content
Options
Connection option
8 – 13
(Default value: 0) (AR-C250)
(Default value: 0) (AR-C150)
(Default value: 0) (AR-C160/C270)
26 - 6
Purpose Setting
Function 1) Used to set the specifications (paper, fixed copy
(Purpose) magnification ratio, machine operations in case of an
image (process) correction error) according to the
destination. (AR-C150/C250/C160/C270)
2) Used to set the user logo. (AR-C100 only)
Item Specifications
Operation/
Procedure
U.S.A. United States of America
Canada Canada
Inch Inch series, other destinations
Japan Japan
AB_B AB series (B5 detection) other destinations
Europe Europe
U.K. United Kingdom
Aus. Australia
AB_A AB series (A5 detection) other destinations
∗
When the destination is changed with SIM 26-6, the following
data are also changed.
Destination