Sharp AR-C150 Service Manual page 175

S07/Ua01/P20 Paper entry detector
1) Remove the connector, and remove the paper entry detector
(S07/Ua01/P20).
∗
Clean the detector.
S07/Ua01/P21 Oil pump
Clean and remove oil attached on the external surfaces.
S06/Ua06/P24
Clean the oil filter attached to the oil pump suction port with waste
cloth.
If the oil filter is clogged, oil is not sufficiently supplied to the heat
roller, causing a trouble.
•
When installing (replacing) this pump, set the pump operation
value of Sim 43-7 referring to the marking color shown in the illus-
tration below.
S07/Ua01/P20/CLN
Marking
S07/Ua02 Paper exit unit
1) Remove the screw and the connector, and remove the paper exit
unit (S07/Ua02).
S07/Ua02/P01 Paper exit detector
1) Remove the paper exit unit. S07/Ua02
2) Remove the connector, and remove the paper exit detector
(S07/Ua02/P01/CLN).
∗
Clean it.
S07/Ua02/P01/CLN
S07/Ua02/P02 Paper exit roller
S07/Ua02/P03 Gear
S07/Ua02/P04 Paper exit idle roller
1) Remove the paper exit unit. S07/Ua02
2) Remove the screw, and remove the paper exit roller unit.
11 – 31