Handlebar - Stihl MS 261 User Manual

Installing
1
– Position the buffers (1)
with their tapered ends facing the
bores.
– Use STIHL press fluid to simplify
assembly, b 15
: Push the tapered ends of the
buffers (1) fully into the
bores (arrows).
The tapered ends (arrows) must be
properly seated on the other sides
of the bores.
MS 261, MS 261 C
1
1
– Push the tank housing (2)
upwards and hold it there.
: Insert and tighten down the
screw (1) firmly.
– Reassemble all other parts in the
reverse sequence.
9.6

Handlebar

– Remove the shroud, b
– Remove AV spring from
handlebar, b 9.4
: Take out the screw (1) and
remove the chain catcher (2).
2
b 6.4
1
2
1
1
: Remove the screws (1) from the
underside of the machine.
1
: Push the handlebar (2) sideways
and pry the AV spring (1) out of its
bearing seat (arrow).
1
: Take out the screws (1).
2
1
81