Manual Fuel Pump - Stihl MS 261 User Manual

2
: Fit the connector (1) with fuel
return hose (2) between the
positioning ribs (arrows) and
push it into the grommet (3).
: Install the fuel hose (1),
b 12.11.2
– Install the air guide shrouds,
b 12.4.2
– Install the carburetor carrier,
b 12.8
2
1
: Push the connector (1) into the
fuel return hose (2) as far as stop.
MS 261, MS 261 C
2
1
3
1
3
: Push the connector (1) with fuel
return hose (2) into the fuel return
hose (3) so that the
contours (arrows) are in
alignment.
1
1
: Fit the fuel return hose (1) behind
the carburetor carrier (2) and
push it onto the fuel pump's
nipple (arrow) as far as stop.
2
1
: Position the fuel return hose (2)
so that it is next to the short circuit
wire's grommet (1).
: Push the fuel return hose (2) into
the guides (arrows).
– Install the carburetor, b
– Close the tank cap.
: Push the fuel suction hose (1)
onto the nipples (arrows) as far
as stop.
2
– Check operation with manual fuel
pump, b 12.11.4
– Reassemble all other parts in the
reverse sequence.

12.11.4 Manual Fuel Pump

– Remove the filter base, b 12.3
2
: Disconnect the fuel suction
hose (1) and fuel return hose (2)
from the nipples (arrows).
b 12.5
1
1
127