Bar Mounting Studs - Stihl MS 261 User Manual

1
2
: Take out the screw (arrow).
: Remove the cover plate (1) and
adjusting wheel (2).
When installing the adjusting wheel,
make sure its teeth face the cover
plate.
– Reassemble in the reverse
sequence.
5.8

Bar Mounting Studs

– Remove the side plate, b 5.2
2 2
: Push stud puller (1)
5910 893 0501 over the collar
studs (2) as far as it will go and
unscrew the studs
counterclockwise.
MS 261, MS 261 C
1
: Before installing, coat the
threads (1) of the collar studs
with Loctite, b
– Fit the collar studs and tighten
them down firmly.
– Reassemble all other parts in the
reverse sequence.
Machines with quick chain
tensioner
– Remove the side plate, b 5.2
: Push stud puller (1)
1
5910 893 0501 over the collar
stud as far as it will go and
unscrew the stud (2)
counterclockwise.
1
b 15
2
1
1
: Before installing, coat the
thread (1) of the collar stud with
Loctite, b b 15
– Fit collar stud and tighten it down
firmly.
– Reassemble all other parts in the
reverse sequence.
33