Konica Minolta bizhub C200 Service Manual page 175

8. Utility Mode
B. DNS Settings
Functions
• To set whether to use DNS function or not.
• To set DNS host name, domain name, and the server address when set to "YES."
Use
Setting/ • The default setting is NO.
Procedure
(1) Host Name
Functions • To set the DNS host name.
Use • To enter the DNS host name.
1. Touch [Network Settings] → [DNS Settings] → [Host Name].
Setting/
Procedure 2. Enter the DNS host name on the screen key board or 10-key pad, and touch [OK].
(2) Domain Name
Functions
• To set the DNS domain name.
Use
1. Touch [Network Settings] → [DNS Settings] → [Domain Name].
Setting/
Procedure 2. Enter DNS domain name on the 10-key pad or screen keyboard, and press [OK].
(3) Server Address
Functions • To set the DNS server address.
• Three server addresses (priority sever, substitute server 1 and 2) are available of set-
Use
ting.
1. Touch [Network Settings] → [DNS Settings] → [Server Address].
Setting/
Procedure 2. Touch one of the keys from DNS server address (1 to 3).
3. Enter the DNS server address using 10-key pad, and touch [OK].
C. Machine Name
Functions • Register the unit name of the main machine.
• Registered machine name is used as the part of the title when communicating with
Use
internet fax or e-mails.
1. Touch [Network Settings] → [Machine Name].
Setting/
Procedure 2. Enter the unit name (with up to 16 English one-byte characters) on the 10-key pad or
screen keyboard, and press [OK].
D. SMTP TX Settings
(1) SMTP Server Address
Functions • To set the SMTP server address.
Use • To enter the SMTP server address.
1. Touch [Network Settings] → [SMTP TX Settings] → [SMTP Server Address].
Setting/
Procedure 2. Enter the SMTP server address using 10-key pad.
3. Touch [Port], and set the port number.
136
YES
Field Service Ver. 1.0 Jun. 2008
"NO"