Fax Settings - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 1.0 Jun. 2008
(3) Reception user box
Functions
• A reception user box specifically for documents containing special information, such as
Fcodes, can be created, and the reception method can be specified.
Use
1. Touch the [RX Document].
2. Touch the button of the user box to be specified.
3. Touch [User Box Name] and enter the user box name from the 10-key pad.
(A maximum of 8 characters can be entered.)
4. Touch [Type] and select the reception management type.
5. Touch [Number] and enter in the number appropriate for the reception type from the
Setting/ 10-key pad.
Procedure 6. Touch [Password] and register the password.
New Password: Enter the new password to be used
Confirm New Password: Re-enter the new password
7. Touch [RX Doc. Settings], then select the desired processing type and touch [OK].
* If [Forward] or [Print & Forward] is selected, set the forwarding destination.
8. If F-codes are used, touch [Remote Input Check] and select whether remote input
checking is enabled or disabled.
6.5.2

Fax Settings

A. Self-ID
• To register the name, telephone number, and other information of the local machine as
Functions
an ID.
• When the registered information is to be printed on journals and displayed on the panel
Use
of the fax machine on the receiving end.
Setting/ 1. Touch the [Self-ID].
Procedure 2. Enter the local machine ID (up to 12 characters) and touch [OK].
B. RX Functions
(1) Reception Mode
Functions • To set the reception mode of faxes.
Use • When changing the reception mode of faxes.
• The default setting is "Auto".
Setting/
Procedure
(2) Numbers of RX Call Rings
Functions • To set the number of call rings heard before automatic reception is activated.
Use • When changing the number of call rings heard before automatic reception is activated.
• The default setting is "1x".
Setting/
Procedure
C. Password Communication
• To allow a fax to be received only when there is a match in the password that has previ-
Functions
ously been registered on the transmitter and receiver ends.
Use • When using password reception.
• The default setting is "00".
Setting/
Procedure
"Auto" Manual
1 to 20
"00" (Disabled) 01 to 99 (Enabled)
6. Utility Mode
17