Software Switch Setting - Konica Minolta bizhub C200 Service Manual

6. Utility Mode
6.5.6

Software Switch Setting

Functions • To specify the value (mode, bit, HEX) for software DIPSW to suit the purpose of the
use, and to change the machine status.
Use
• Only software DIPSW available of setting by the user (administrator) are described
here.
• For details of the software DIPSW as well as software DIPSW which can be set by
CE, refer to the [Service mode] or main body service manual.
Setting/ 1. Touch [Software Switch Setting].
Procedure 2. Touch [Mode Selection], and enter the mode number (three digit number) using the
10-key pad.
3. Touch [Bit Selection].
4. Set the cursor using the [ ← ] or [ → ] key to specify the bit with 0 or 1 on the 10-key
pad. (When setting in hexadecimal, press [HEX Selection] to enter using the 10-key
pad or A to F key.)
5. Touch [Apply].
6. Touch [OK].
A. List of the software switch settings for administrator
(1) For network settings
Mode
356 • Specifying settings concerning the SMTP transmission timeout
357 • Specifying settings concerning the SMTP reception timeout
358 • Specifying settings concerning the POP3 reception timeout
361 • Specifying settings concerning Assistant tool for C200, SMTP transmission/reception
and POP3 reception
364 • Specifying the setting for the POP Before SMTP time
367 • Specifying settings concerning the timeout for a DNS inquiry
372 • Specifying settings concerning the transmission interval for divided e-mail messages
380 • Specifying security settings for e-mail transmissions
383 • Specifying security settings for e-mail receptions
384 • Specifying settings concerning the network protocol
389 • Specifying settings concerning the encryption method for SSL
470 • Specifying settings concerning Assistant tool for C200
20
Field Service Ver. 1.0 Jun. 2008
Setting item