Conditions For Life Specifications Values; Control Causing Inhibited Printing For One Part When An Inhibited-Printing Event Occurs In Another Part - Konica Minolta bizhub C200 Service Manual

3. Periodical check
*6: The count condition is different according to the paper length of the sub scanning direc-
tion.
Paper length of
sub scanning direction
Less than 216 mm
216 mm to 432 mm
432 mm or more
3.3.2

Conditions for life specifications values

Item
Job type (standard mode)
Paper size
PV/M
Original density
(Coverage)
Low power mode
No. of operating days per month
3.3.3 Control causing inhibited printing for one part when an inhibited-printing
event occurs in another part
• In order to reduce the maintenance call times: when printing prohibiting is reached for
any of the following parts, make printing prohibited also for other parts whose life value is
reached, and replace those parts at the same time.
Target parts: Fusing unit, transfer belt unit, imaging unit /C, imaging unit /M,
imaging unit /Y, imaging unit /K
14
Count value
1 count
2 counts
3 counts
Monochrome : Making 2 copies per job
Color
A4 or 8 1 /
2
Black: 2,300 / Color: 500
Color 5 % for each color
Monochrome K 5 %
OFF
20 days
(main power switch turned ON and OFF 20 times per month)
Field Service Ver. 1.0 Jun. 2008
Description
: Making 2 copies per job
x 11