Olivetti d-Copia 1600 Service Manual page 147

8. Remove the two screws holding the exit unit
and then pull out the unit a little.
9. Remove the exit tray.
10. Remove the four screws and detach the two
connector and then remove the laser scan-
ner unit.
11. Replace the laser scanner unit and refit all
the removed parts.
Figure 1-5-46
Figure 1-5-47
Connector
Laser scanner
unit
Figure 1-5-48
2HA/2HB
Exit unit
Exit tray
Connector
1-5-21