2HA/2HB
7. Temporarily push the MP paper feed pulley
unit into the rear side to unlock the front side
and then remove it from the copier.
8. Remove the MP paper feed pulley from the
MP paper feed pulley shaft.
9. Push the fitting portions of the MP separa-
tion pad. Remove the MP separation pad
from the copier.
10. Replace the MP paper feed pulley and MP
separation pad and refit all the removed
parts.
1-5-10
MP paper feed pulley unit
Figure 1-5-18
MP paper feed pulley
Figure 1-5-19
MP separation pad
Figure 1-5-20
MP paper feed
pulley shaft