Olivetti d-Copia 1600 Service Manual page 78

2HA/2HB
Maintenance
item No.
Adjusting margins for scanning an original on the contact glass
U403
Description
Adjusts margins for scanning the original on the contact glass.
Purpose
Make the adjustment if margins are incorrect.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode
U402
(P.1-3-45)
Adjustment
1. Press the start key.
2. Select the item using the exposure adjustment keys.
Exposure
indicator
Exp. 1
Exp. 2
Exp. 3
Exp. 4
3. Press the interrupt key.
4. Place an original and press the start key to make a test copy.
5. Change the setting value using the zoom +/- keys.
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
6. Press the start key. The value is set.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
1-3-46
U404
U403
(P.1-3-47)
Description
Scanner left margin
Scanner leading edge margin
Scanner right margin
Scanner trailing edge margin
Scanner leading edge margin (3 ± 2.5 mm)
Ejection direction
(reference)
Scanner
left margin
+1.5
(2.5 mm)
–2.0
Description
Setting
range
0.0 to 10.0
0.0 to 10.0
0.0 to 10.0
0.0 to 10.0
Scanner trailing edge margin
(3 ± 2.5 mm)
Figure 1-3-16
Initial Change in
setting value per step
2.0 0.5 mm
3.0 0.5 mm
2.0 0.5 mm
2.0 0.5 mm
Scanner
right margin
+1.5
(2.5 mm)
–2.0