Olivetti d-Copia 1600 Service Manual page 73

Maintenance
item No.
Switching between double and single counts
U253
Description
Switches the count system for the total counter and other counters.
Purpose
According to user (copy service provider) request, select if A3/11" x 17" paper is to be counted as one sheet
(single count) or two sheets (double count).
Method
Press the start key.
Setting
1. Select the item using the zoom +/- keys.
Display
Sin
-b4
-A3
Initial setting: -A3
2. Press the start key. The setting is set, and the indication for selecting a maintenance item No. appears.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Turning auto start function on/off
U254
Description
Selects if the auto start function is turned on.
Purpose
Normally no change is necessary. If incorrect operation occurs, turn the function off: this may solve the prob-
lem.
Method
Press the start key.
Setting
1. Select either "on" or "oFF" using the zoom +/- keys.
Display
on
oFF
Initial setting: on
2. Press the start key. The setting is set, and the indication for selecting a maintenance item No. appears.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Switching copy operation at toner empty detection
U258
Description
Selects if continuous copying is enabled after toner empty is detected.
Method
Press the start key.
Setting
1. Select single or continuous copying using the zoom +/- keys.
Display
Sin
Con
Initial setting: Sin
2. Press the start key. The setting is set, and the indication for selecting a maintenance item No. appears.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Description
Description
Single count for all size paper
Double count for B4 size or larger
Double count for A3/11" x 17" paper only
Description
Auto start function on
Auto start function off
Description
Enables only single copying.
Enables single and continuous copying.
2HA/2HB
1-3-41