Table of Contents
Advertisement
5.4.7 Site Survey
Choose menu "WLAN2 (2.4GHz) Site Survey" to scan the available local AP. If any Access Point is found,
you could choose any one to connect with manually when the Client Mode is enabled.
5.4.8 WPS
WPS (Wi-Fi Protected Setup) is designed to ease setup of security Wi-Fi networks and subsequently network
management.
This
Wireless
Infrastructure-Client mode, and the wireless root interface of Universal Repeater mode.
Simply enter a PIN code or press the software PBC button or hardware WPS button (if any) and a secure
wireless connection is established.
PBC: If you find the WPS LED blinking for 2 minutes after you press the hardware WPS button on the
device, it means that PBC encryption method is successfully enabled. And an authentication will
be performed between your router and the WPS/PBC-enabled wireless client device during this
time; if it succeeds, the wireless client device connects to your device, and the WPS LED turns
off. Repeat steps mentioned above if you want to connect more wireless client devices to the
device.
PIN：To use this option, you must know the PIN code from the wireless client and enter it in
corresponding field on your device while using the same PIN code on client side for such
connection.
Figure 5-72 Site Survey – 2.4GHz
Router
supports
WPS
-85-
features
for
AP
mode,
AP+WDS
mode,
Advertisement
Table of Contents
