Table of Contents
Advertisement
Static DHCP
Domain Name
802.1d Spanning Tree
Clone MAC Address
UPnP Enable
If you change the IP address of LAN, you must use the new IP address to login the
AP.
When the IP address of the WMC303-1200 is changed, the clients on the network
often need to wait for a while or even reboot before they can access the new IP
address. For an immediate access to the AP, please flush the netbios cache on the
client computer by running the "nbtstat –r" command before using the device
name of the WMC303-1200 to access its Web Management page.
the Active DHCP Client Table.
Click the "Set Static DHCP" button and you can reserve some IP
addresses for those network devices with the specified MAC
addresses anytime when they request IP addresses.
Default is IFS.
You can enable or disable the Spanning Tree function.
You can input an MAC address here for using clone function.
You can enable or disable the UPnP function.
The UPnP feature allows the devices, such as Internet computers, to
access the local host resources or devices as needed. UPnP devices
can be automatically discovered by the UPnP service application on
the LAN.
-28-
Advertisement
Table of Contents
