Lan Settings - Interlogix IFS WMC303-1W-1T-1200 User Manual

5.2 TCP / IP Settings
This page is used to configure the parameters for local area network which connects to the LAN port of your AP.
Here you may change the setting for IP address, subnet mask, DHCP, etc.

5.2.1 LAN Settings

On the LAN Settings page, you can configure the IP parameters of the LAN on the screen as shown below.
The page includes the following fields:
Object
IP Address
Subnet Mask
Default Gateway
DHCP
DHCP Client Range
Figure 5-16 LAN Setting
The default LAN IP address of the WMC303-1W-1T-1200 is
192.168.0.100. You can change it according to your request.
Default is 255.255.255.0. You can change it according to your request.
Default is 192.168.0.253. You can change it according to your request.
You can select a Disabled, Client, and Server. Default is Disabled,
meaning the WMC303-1200 must connect to a router to assign IP
addresses to clients.
For the Server mode, you must enter the DHCP client IP address
range in the field. And you can click the "Show Client" button to show
-27-
Description