Interlogix IFS WMC303-1W-1T-1200 User Manual page 36

Object
Band
Mode
SSID
Channel Width
Control Sideband
Channel Number
Step 4: Wireless 5GHz Security Settings
Secure your wireless network by turning on the WPA or WEP security feature on the router. For this section you
can set WEP and WPA-PSK security mode.

Encryption: WEP
The following picture shows how to set the WEP security.
The page includes the following fields:
Object
Key length
Key Format
Key Setting
Supports 802.11a, 802.11n, 802.11ac and mixed. Please choose its band
according to your clients.
Supports AP, Client, WDS and AP+WDS mode.
Service Set Identifier identifies your wireless network.
Select 80MHz if you use 802.11ac; select 40MHz if you use 802.11n;
otherwise, 20MHz for the 802.11a mode.
It is only valid when you choose channel width 40MHz.
Indicates the channel setting for the AP.
Figure 5-8 Wizard – Wireless 5GHz Security Setup
Figure 5-9 5GHz Wireless Security Setup – WEP Setting
WEP supports 64-bit or 128-bit security key.
User can enter key in ASCII or Hex format.
Enter the key whose format is limited by the Key format, ASCII or Hex.
Description
Description
-22-