Table of Contents
Advertisement
The page includes the following fields:
Object
Disable WPS
WPS Status
Self-PIN Number
Push Button
Configuration
Client PIN Number
The WPS encryption can be implemented only between your Router and another
WPS-capable device.
Example of how to establish wireless connection using WPS. Please take the following steps:
Step 1. Choose menu "WLAN1 (5GHz) WPS" to configure the setting for WPS. After the configuration,
please click the "Apply Changes" button to save the settings.
Step 2. Add a new device.
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between
wireless adapter and AP using either Push Button Configuration (PBC) method or PIN method.
To build a successful connection by WPS, you should also do the corresponding configuration
of the new device for WPS function.
A.
By Push Button Configuration (PBC)
You can check the box to disable the WPS function.
Here you can check if the connection via WPS is established or not.
It is the PIN number of the WMC303-1W-1T-1200 here.
Click the "Start PBC" to activate WPS as well in the client device within
2 minutes.
In addition to the PBC method, you can also use the PIN method to
activate the WPS. Just enter the PIN number of the client device in the
field and click the "Start PIN" button.
-55-
Description
Advertisement
Table of Contents
