Table of Contents
Advertisement
If the AP loses power for any reason, it cannot keep its clock running, and will not have
the correct time when it is started again. To maintain correct time for schedules and logs,
either you must enter the correct time after you restart the AP, or you must enable the
NTP Server option.
5.5.4 Schedule Reboot
This page allows you to enable and configure system reboot schedule. The device can regularly reboot
according to the reserved time when connecting to the Internet.
The page includes the following fields:
Object
Schedule Reboot
Setting
Reboot Time
Reboot Plan
Figure 5-83 Schedule Reboot
Enable or disable the Schedule Reboot function.
Enter the Reboot Time (24-hour format) to enable this function to take effect.
There are two Reboot Plans supported in the AP:
Weekday: select this option to let the device reboot automatically according
to the reserved time in one or more days of a week.
Every day: select this option to let the device reboot automatically according
to the reserved time every day.
-94-
Description
Advertisement
Table of Contents
