Interlogix IFS WMC303-1W-1T-1200 User Manual page 45

The page includes the following fields:
Object
Disable Wireless LAN
Interface
Band
Mode
SSID
Channel Width
Channel Number
Broadcast SSID
Data Rate
Check the box to disable the wireless function.
Select the desired mode. Default is "5GHz (A+N+AC)". It is strongly
recommended that you set the Band to "5GHz (A+N+AC)", and all of
802.11a, 802.11n, and 802.11ac wireless stations can connect to the
WMC303-1W-1T-1200.
 5 GHz (A): 802.11a mode, rate is up to 54Mbps
 5 GHz (N): 802.11n mode, rate is up to 300Mbps
 5 GHz (AC): 802.11n mode, rate is up to 867Mbps(2T2R)
 5 GHz (A+N): 802.11a/n mode, rate is up to 300Mbps
 5 GHz (N+AC): 802.11n/ac mode, rate is up to 300Mbps or
867Mbps
 5 GHz (A+N+AC): 802.11a/n/ac mode, rate is up to 54Mbps,
300Mbps, or 867Mbps
There are four kinds of wireless mode selections:

AP

Client

WDS

AP+WDS
If you select WDS or AP+WDS, please click "WDS Settings" submenu
for the related configuration. Furthermore, click the "Multiple AP"
button to enable multiple SSID functions.
The ID of the wireless network. User can access the wireless network
through it only. However, if you switch to Client Mode, this field
becomes the SSID of the AP you want to connect with.
Default: IFS AP 5G
You can select 20MHz, 40MHz or 80MHz.
You can select the operating frequency of wireless network.
Default: 40
If you enable "Broadcast SSID", every wireless station located within
the coverage of the AP can discover its signal easily. If you are building
a public wireless network, enabling this feature is recommended. In
private network, disabling "Broadcast SSID" can provide better
wireless network security.
Default is "Enabled".
Set the wireless data transfer rate to a certain value. Since most of
wireless devices will negotiate with each other and pick a proper data
-31-
Description