Table of Contents
Advertisement
The page includes the following fields:
Object
Disable Wireless LAN
Interface
Band
Mode
Network Type
SSID
Broadcast SSID
Check the box to disable the wireless function.
Select the desired mode. Default is "5GHz (A+N+AC)". It is strongly
recommended that you set the Band to "5GHz (A+N+AC)", and all of
802.11a, 802.11n, and 802.11ac wireless stations can connect to the
WMC303-1200.
5 GHz (A): 802.11a mode, rate is up to 54Mbps
5 GHz (N): 802.11n mode, rate is up to 300Mbps
5 GHz (AC): 802.11n mode, rate is up to 867Mbps(2T2R)
5 GHz (A+N): 802.11a/n mode, rate is up to 300Mbps
5 GHz (N+AC): 802.11n/ac mode, rate is up to 300Mbps or
867Mbps
5 GHz (A+N+AC): 802.11a/n/ac mode, rate is up to 54Mbps,
300Mbps, or 867Mbps
There are four kinds of wireless mode selections:
AP
Client
WDS
AP+WDS
If you select WDS or AP+WDS, please click "WDS Settings" submenu
for the related configuration. Furthermore, click the "Multiple AP"
button to enable multiple SSID function.
In Infrastructure, the wireless LAN serves as a wireless station. And
the user can use the PC equipped with the WMC303-1200 to access
the wireless network via other access points. In Ad hoc, the wireless
LAN will use the Ad-hoc mode to operate.
Default is "Infrastructure".
Note: Only while the wireless mode is set to "Client", then the
Network Type can be configured.
The ID of the wireless network. User can access the wireless network
via its ID. However, if you switch to Client mode, this field becomes the
SSID of the AP you want to connect with.
Default: WMC303 5G
If you enable "Broadcast SSID", every wireless station located within
the coverage of the WMC303-1200 can discover its signal easily. If you
are building a public wireless network, enabling this feature is
recommended. In private network, disabling "Broadcast SSID" can
provide better wireless network security.
-37-
Description
Advertisement
Table of Contents
