The page includes the following fields:
Object
Band
Mode
SSID
Channel Width
Control Sideband
Channel Number
Step 6: Wireless 2.4GHz Security Settings
Secure your wireless network by turning on the WPA or WEP security feature on the router. For this section you
can set WEP and WPA-PSK security mode.
Encryption: WEP
The following picture shows how to set the WEP security.
Supports 802.11b, 802.11g, 802.11n and mixed. Please choose its band
according to your clients.
Supports AP, Client, WDS and AP+WDS mode.
Service Set Identifier, it identifies your wireless network.
Select 40MHz if you use 802.11n, otherwise 20MHz for the 802.11b/g mode.
It is only valid when you choose channel width 40MHz.
Indicates the channel setting for the AP.
Figure 5-12 Wizard – Wireless 2.4GHz Security Setup
Figure 5-13 2.4GHz Wireless Security Setup – WEP Setting
Description
-24-