Table of Contents
Advertisement
Data Rate
Associated Clients
Enable Universal
Repeater Mode
(Acting as AP and client
simultaneously)
5.3.2 Advanced Settings
Choose menu "WLAN1 (5GHz) Advanced Settings" and you can configure the 5GHz advanced settings for
the wireless network on this page. After the configuration, please click the "Apply" button to save the settings.
The page includes the following fields:
recommended. In private network, disabling "Broadcast SSID" can
provide better wireless network security.
Default is "Enabled".
Set the wireless data transfer rate to a certain value. Since most of
wireless devices will negotiate with each other and pick a proper data
transfer rate automatically, it's not necessary to change this value
unless you know what will happen after modification.
Default is "Auto".
Click the "Show Active Clients" button to show the status table of
active wireless clients.
Universal Repeater is a technology used to extend wireless coverage.
To enable Universal Repeater mode, check the box and enter the
SSID you want to broadcast in the field below. Then please click
"Security" submenu for the related settings of the AP you want to
connect with.
Figure 5-33 Wireless Advanced Settings – 5GHz
-45-
Advertisement
Table of Contents
