Table of Contents
Advertisement
Associated Clients
Enable Universal
Repeater Mode
(Acting as AP and client
simultaneously)
Multiple-SSID
Enable multiple-SSID can broadcast multiple WLAN SSID's using virtual interfaces. You can have different
encryption settings for each WLAN and you can restrict what they have access to.
Choose menu "WLAN1 (2.4GHz) → Basic Settings → Multiple AP" to configure the device as a general
wireless access point with multiple SSIDs.
The device supports up to four multiple Service Set Identifiers. You can back to the Basic Settings page to
set the Primary SSID. The SSID's factory default setting is IFS 2.4G VAP1~4 (Multiple-SSID 1~4). The
SSID can be easily changed to connect to an existing wireless network or to establish a new wireless
network. When the information for the new SSID is finished, click the Apply Changes button to let your
changes take effect.
unless you know what will happen after modification.
Default is "Auto".
Click the "Show Active Clients" button to show the status table of
active wireless clients.
Universal Repeater is a technology used to extend wireless coverage.
To enable Universal Repeater mode, check the box and enter the
SSID you want to broadcast in the field below. Then please click
"Security" submenu for the related settings of the AP you want to
connect with.
Figure 5-50 2.4GHz Wireless Basic Settings – Multiple AP
-62-
Advertisement
Table of Contents
