Table of Contents
Advertisement
※ IEEE 802.3at PoE switch is required.
screws.
Step 3. Plug the RJ-45 Ethernet cable into the PoE port of the WMC303-1W-1T-1200.
Step 4. Load the device into the mounting bracket, and be sure the device is mated with two fixed screws.
Then, rotate the device clockwise to lock it in position.
Figure 3-2 WMC303-1200 Installation Diagram 2
Figure 3-3 WMC303-1200 Installation Diagram 3
-13-
Advertisement
Table of Contents
