Table of Contents
Advertisement
Associated Clients
Enable Universal
Repeater Mode
(Acting as AP and client
simultaneously)
5.4.2 Advanced Settings
Choose menu "WLAN2 (2.4GHz) Advanced Settings" to configure the 2.4GHz advanced settings for the
wireless network on this page. After the configuration, please click the "Apply" button to save the settings.
Click the "Show Active Clients" button to show the status table of
active wireless clients.
Universal Repeater is a technology used to extend wireless coverage.
To enable Universal Repeater Mode, check the box and enter the
SSID you want to broadcast in the field below. Then please click
"Security" submenu for the related settings of the AP you want to
connect with.
Figure 5-64 Wireless Advanced Settings – 2.4GHz
-75-
Advertisement
Table of Contents
