Interlogix IFS WMC303-1W-1T-1200 User Manual page 62

The page includes the following fields:
Object
Select SSID
Encryption
Authentication Mode
802.1x Authentication
5.3.5 Access Control
Choose menu "WLAN1 (5GHz)  Access Control" to allow or deny the computer of specified MAC address to
connect with the WMC303-1200 on this page. After the configuration, please click the "Apply Changes" button to
save the settings.
Select the SSID you want to configure the wireless security function, which
includes the root one and the client one.

Disable:
No security setup for wireless connection.

WEP:
It is based on the IEEE 802.11 standard. And the default setting of
authentication is Automatic, which can select Open System or Shared Key
authentication type automatically based on the wireless station's capability
and request. Furthermore, you can select Key Length and enter 10 and 26
Hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not
promoted) or 5 and 13 ASCII characters in the Encryption Key field.

WPA:
WPA is a medium level encryption and is supported by most wireless devices
and operating systems.

WPA2:
WPA2 is a high level encryption and is supported by most wireless devices
and operating systems.

WPA / WPA2 / WPA-Mixed:
WPA Mixed Mode allows the use of both WPA and WPA2 at the same time.

Enterprise (RADIUS)
When you select the authentication mode based on Enterprise (Radius
Server), please enter the IP Address, Port, and Password of the Radius
Server.

Personal (Pre-Shared Key)
When you select the other authentication mode based on Personal
(Pre-Shared Key), please enter at least 8 ASCII characters (Passphrase) or
64 Hexadecimal characters. All of the Cipher Suites support TKIP and AES.
Enable 802.1x authentication function and then please enter the IP Address,
Port, and Password of the Radius Server.
-48-
Description