Assembling The Drive - DURKOPP ADLER M-type 867 Service Instructions Manual

Machines with integrated motor

19.3 Assembling the drive

Attaching
Fig. 76: Attaching the rotor
the rotor
1. Push the rotor (3) onto the shaft until the deep groove ball bearing is
2. Screw all four threaded screws (1, 2) firmly in place, observing the sur-
Service Manual 867 Version 02.0 - 04/2015
①
(1) - Threaded screw
(2) - Threaded screw
resting against the stop.
face of the shaft in doing so: Screw the first screw in the direction of
rotation firmly in place on the surface.
② ③
(3) - Rotor with deep groove ball bearing
91