Machines with integrated motor
Attaching
Fig. 81: Attaching the handwheel flange
the handwheel
flange
①
②
③
1. Attach the handwheel flange (1) such that the two markings (2, 3) are
2. Tighten both setscrews (4), taking care in doing so that there is a dis-
Attaching
Fig. 82: Attaching the handwheel
the handwheel
①
②
1. Attach the handwheel (1) and tighten all three screws (2).
2. Set the zero point via the control, see manual for the control unit.
Service Manual 867 Version 02.0 - 04/2015
(1) - Handwheel flange
(2) - Cover marking
in line.
tance of approx. 0.5 - 1 mm between the handwheel flange (1) and
cover plate.
(1) - Handwheel
(3) - Marking for handwheel flange
(4) - Setscrews
(2) - Screws
④
95