DURKOPP ADLER M-type 867 Service Instructions Manual page 95

Machines with integrated motor
Attaching
Fig. 78: Attaching the encoder
the encoder
1. Push the encoder (2) and encoder disc (1) onto the shaft.
2. Align the encoder disc (1) such that it runs in the middle of the
3. Screw the encoder disc (1) and encoder (2) firmly in place.
4. Tighten the retaining plate (2).
5. Insert plugs L1, L2, and L3 (5).
6. Insert the encoder plug (4).
Service Manual 867 Version 02.0 - 04/2015
①
②
③
④
⑤
(1) - Encoder disc
(2) - Encoder
(3) - Retaining plate
encoder (2).
(4) - Encoder plug
(5) - Plugs L1, L2, L3
93