Disassembling The Drive - DURKOPP ADLER M-type 867 Service Instructions Manual

19.2 Disassembling the drive

Removing the
Fig. 71: Removing the handwheel and handwheel flange
handwheel and
handwheel flange
①
②
1. Undo all three screws (2) on the handwheel (1).
2. Undo both setscrews (3) and remove the handwheel flange (4).
Removing
Fig. 72: Removing the cover
the cover
①
②
③
④
1. Undo all five screws (1).
2. Carefully remove the upper cover (2) from the side, paying attention to
3. If there is a lower cover mounted: Undo all three screws (4) and remove
88
(1) - Handwheel
(2) - Screws
(1) - Screws
(2) - Upper cover
(3) - Dial
the dial (3) in doing so.
the lower cover (5).
Machines with integrated motor
(3) - Setscrews
(4) - Handwheel flange
⑤
(4) - Screws
(5) - Lower cover
(depending on machine)
Service Manual 867 Version 02.0 - 04/2015
④
③