20.2 Machines with moving binder
Sewing machines with a moving binder allow the edge of the sewing mate-
rial to be bound simultaneously.
Proper setting
The binder (1) operates in sync with the feed. You can use the
Plus/Minus buttons to adjust the binder for more width or less
feed.
Fig. 88: Adjusting the binder
Basic setting for synchronous operation
1. Set the handwheel to 100°.
The shaft (2) must be parallel to the lower shaft (3).
2. Remove the shaft (2).
3. Check for synchronous operation.
100
WARNING
Risk of injury
Risk of crushing injuries and stab wounds from mov-
ing and sharp parts.
Switch off the sewing machine before setting the
binder.
(1) - Binder
(2) - Shaft
(3) - Lower shaft
①
②
④
⑤
⑥
(4) - Lever
(5) - Clamping spring
(6) - Screw
Service Manual 867 Version 02.0 - 04/2015
Special machines
③