DURKOPP ADLER M-type 867 Service Instructions Manual page 83

Short thread cutter (KFA)
Setting steps
1. Loosen the setscrews (6) on the control cam (5).
2. Move the control cam (5) towards the clamping ring (4) until it makes
3. Re-tighten the setscrews (6) on the control cam (5).
4. Check the position as described above under Proper setting and cor-
Service Manual 867 Version 02.0 - 04/2015
contact and correct the position of the control cam (5).
rect the position again if necessary.
81