Assembling The Drive; Assembling The Rotor - DURKOPP ADLER 827 Service Instructions Manual

18.3 Assembling the drive

18.3.1 Assembling the rotor

Fig. 65: Assembling the rotor
(1) - Threaded pins
(2) - Threaded pins
To assemble the rotor:
1. Push the rotor with deep groove ball bearing (3) onto the shaft until
2. Tighten all threaded pins (1), (2) firmly in place, observing the surface
82
①
the deep groove ball bearing is resting against the stop.
of the shaft in doing so: Tighten the first screw in the direction of rotation
firmly in place on the surface.
② ③
(3) - Rotor with deep groove ball bearing
Service Instructions 827/827-M - 01.0 - 05/2019
Integrated motor