DURKOPP ADLER M-type 867 Service Instructions Manual page 92

Removing
Fig. 74: Removing the stator
the stator
1. Undo all three screws (1).
2. Remove the cover plate (2).
3. Remove the stator with ring (3).
Removing
Fig. 75: Removing the rotor
the rotor
1. Remove the arm cover.
2. Undo all four threaded screws (1, 2).
3. Remove the rotor with deep groove ball bearing (2).
90
①
②
(1) - Screws
(2) - Cover plate
①
(1) - Threaded screw
(2) - Threaded screw
Machines with integrated motor
(3) - Stator with ring
② ③
(3) - Rotor with deep groove ball bearing
Service Manual 867 Version 02.0 - 04/2015
③